Bmw Inpa Xp

 admin

BMW INPA Ediabas 5.0.2 download, inpa 5.06 download, inpa 6.4.7 download hereand install it on Windows XP/ Vista or Windows 7/ 8/ 10 (32bit or 64bit), to get it work with K+DCAN USB cable. Download the BMW BMW INPA WinKFP NCSExpert + more 1.3.ova (virtual machine) Choose the downloaded OVA file and on the next step tick 'Reinitialize the MAC address of all network cards'. Next step - plug the K+Dcan cable, start the virtual machine and transfer it to it - from the menu - DevicesUSB choose your cable (usually something that. Computer configuration: Windows XP SP2/SP3 O/S Hard disk: at least 20 GB free space 512 MB RAM Free download INPA full iso (326MB) BMW INPA Ediabas bit 64 BMW INPA 5.0 diagnostic software BMW INPA 5.02 and Ediabas V6.47 (Crack) INPA V5.06 torrent free download (2.59 GB) BMW Ediabas V10.9 software full download Relate Hot BMW Scanner products: 1. This is the main thread about INPA cables and software with the broken link:is the last page of.

If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it.

Disclaimer:
I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk.

Pre-installation caution:
Here are the INPA driver & software, free download links. If the driver/software is working, then ignore the next part. Otherwise take a look at the following part for reference.
INPA Driver: http://www.obd2vip.com/download/inpa-driver.zip（Close antivirus software or set your browser to download success）
INPA software: http://www.obd2vip.com/download/inpa-2.zip

Procedure:

1. Open your Device Manager. Control Panel–Hardware & Sound–Device Manager.
2. Connect the INPA K+DCAN cable with computer/PC-Double click
3. Locate USB Serial Converter->DetailsDropdown Menu->Hardware IDs. The PID number is the one you want. Will most likely be 0000.
4. Download CDM v2.08.30
http://www.ftdichip.com/Drivers/CDM/CDM%20v2.08.30%20for%20Windows%208.1.zip

5. Disable “Driver signature verification” Settings–Change PC Settings–Recovery–Advanced Startup–Restart.
This will restart your PC to Advanced settings. From there: Troubleshoot–Advanced Options–Startup Settings–Restart–F7

Follow these picture guides:
Your PC will then restart with signature verification disabled. You are now able to edit the INPA drivers.

6. Unzip the Drivers file that you just downloaded and open up

7. Open ftdibus.inf
8. Replace every PID_6001 with PID_0000 to match your hardware ID. Scan through the whole document. Then save it.
9. Then find ftdiport.inf. Do the same to ftdiport.inf

10. Back in your Device Manager double click on your OBDII cable again.
Locate USB Serial Convertor Properties->Driver->Update Driver-> Browse my computer.
Locate your driver and install. You will need to install it for both USB Serial Converter and Ports & COM.

11. Setup INPA cable as normal and run INPA software.

It seems that the white FTDI chip INPA cables have to be manually put into D-CAN mode. This file will take care of that. It is normal for the LED to go out.
http://www.mediafire.com/download/35fnrnd3q3dvf3w/D-CAN.exe
If you put the cable into DCAN mode, the LED goes off, and it says there is no adapter connected. Please connect it to the car and run the DCAN mode.

Related posts:

BMW INPA Windows XP installation guide… Here you go…The inpa ediabas software provided and the procedures proposed are intended for personal, educational and experimental use.

Note: this how-to guide here especially for Windows XP users only

For users with Windows Vista, Win 7 (32/64bit), Win 8, Win10, please go to

InpaBmw

bmw inpa / ediabas interface: INPA K+DCAN usb cable

The version 2016 cable is great, designed with the FT232RQ chip and a switch to turn LEFT is for 7 pin or RIGHT for 8 pin (8 pin for K-LINE communication (old DCAN cables cannot do it) for BMW from 1998 to 2008)

k+dcan cable software: INPA 5.0.2

Running system: Windows xp

k+dcan usb interface software installation:

Step 1: Delete ALL versions of INPA-ADS from your computer or remane all INPA-ADS folders.

For example: remane INPA into “_INPA”, EDIABAS into “_EDIABAS” and so on.

Step 2: Open folder Step_1 in the root of the CD-disk comes with the inpa cable

Copy folder EC-APPS onto disk С:

Step 3: Run file Step_1NFSEntpacktdisk1SETUP.EXE

Bmw Inpa Xp

While installing, choose User Mode

Further choose in opening windows:

  1. Parametrieren einer neuen Konfiguration ohne Daten
  2. 2. OBD
  3. Kein API-TRACE
  4. Kein IFH-TRACE
  5. Komfort (.IPO)

! RE-BOOT YOUR Computer !

Step 4: Run file Step_2INSTALLInstprog.exe

  1. Choose ENGLISH, press Continue, then press Continue again
  2. While choosing the HDD disk for initial setup

DO NOT change the location C:.

INPA installation must be on drive С: ONLY !

  1. Choose configuration BMW Group Rectification programs UK, press Continue.
  2. Activate all spare boxes with : EDIABAS 6.4.3 – UPDATE, INPA 5.0.1 – UPDATE,

NCS Expert 3.0.8 – Complete

  1. Press Continue.

Step 5: Run file Step_3INSTALLInstprog.exe

  1. Choose ENGLISH, press Continue, then Continue again
  2. While choosing the HDD disk for initial setup.

DO NOT change the location C:.

INPA installation must be on drive С: ONLY !

  1. Choose configuration BMW Group Rectification programs UK, press Continue.
  2. Activate all spare boxes with: INPA 5.0.1 – UPDATE, NCS Expert 3.0.8 – UPDATE
  3. Press Continue.

Step 6: Find the file С:EC-APPSINPACFGDAT named inpa.ini

and replace it with the file inpa.ini that is in the root directory of CD-disk given.

Step 7: Plug the Adapter into spare USB-port and install drivers manually from the folder Driver_D_CAN_USB using Driver Wizard of your Windows XP-Service Pack-2

Step 8: Use following pictures for help.

Step 9: In Advanced field change number of COM-port to the value from 2 to 4.

Also change the value of Latency Timer from 16 to 1. Remember the number of the COM-port choosen !

Step 10: In the file EDIABAS.INI “Interface = STD:OBD” must be chosen

(That is default parameter after installing from CD-disk given. Check the parameter if you use another version of INPA !)

Step 11: In the file C:WindowsOBD.INI put the number of USB-COM-port to the value that you remembered in the step_3

Step 12: Run from CD-disk a file Driver_D_CAN_USBOBDSetup.exe

Step 13:RE-BOOT your Computer !

Step 14: Use the following order of using K+DCAN USB cable adapter:

– Plug the Adapter into spare USB-port

– Plug the Adapter into OBD-II connector of BMW

– Turn the Ignition into ON position

– Rune the soft INPA with file С:EC-APPSINPABINinpaload.exe

– Choose the model of BMW and type of modul you want to see

– Close the soft and disconnect the Adapter from USB-port each time you change the car connected

N.B.:

K+dcan adapter is already configured to work with BMW both K-line and CAN-bus.

Modes of configuration file D-CAN.exe, that is on the CD-disk given in the folder

_D_CAN_USB as follows:

BMW INPA Cable Configuration:

For configuration interface:

Bmw Inpa Download Xp

Connect USB cable

Bmw Inpa Windows Xp

Run D-CAN.EXE and setup CAN BUS mode.

Bmw Inpa Xpress

LED should OFF

Bmw Inpa Install Windows Xp

Don’t use USB Extender cable, directly connect interface to computer.

Bmw Inpa Windows Xp Download

Related posts: